Muse gadgets / Waveshare ESP32-C6-LCD-1.47
Status screenOfficially supportedESP32 SDK
Waveshare ESP32-C6-LCD-1.47
Board $12-13 · about $22 with cable/parts
Beginner · no toolsA USB-C data cable and one flash command. No backup or workaround.
ESP32-C6 board with a 1.47" 172x320 ST7789 LCD and 4 MB flash, no PSRAM. Muse shows status on the screen and draws images; no PSRAM, so no home-network tunnel. Uses the BOOT button.
What it can do
- Voiceno
- Images · Coloryes
- Touchscreenno
- Camerano
- Air sensorsno
- Home-network tunnelno
- Batteryno
- Over-the-air updatesno
Things to say to it
“Show a picture of a sunset on my gadget.”“Put today's top three tasks on the gadget's screen.”
What you need
Developer details · build command and SDK notes
Your coding agent runs this for you. The full sequence (token, flash, pair) is on the build page.
tools/board.sh waveshare-c6-lcd-147 buildLimits
Good to know
- Boards without PSRAM (classic ESP32, ESP32-C6) run without the home-network tunnel; Muse can still reach and control them.
- Pairing has no manufacturer verification and can't prevent an active man-in-the-middle attack.
- Builds are signed with the included development key and never enable Secure Boot. Enable NVS encryption (CONFIG_HOMEHUB_NVS_ENCRYPTION).
- Custom ESP32 commands are not a documented API yet: the command set (display.draw_url, sensors.read, camera.capture, ...) is hardcoded in main/app.c.
Alternatives
Compare with
Primary links