Muse gadgets / Home Assistant Voice Preview Edition
Status screenOfficially supportedESP32 SDK
Home Assistant Voice Preview Edition
Board $69 · about $89 with cable/parts
Beginner · no toolsOne flash command over its own USB. It replaces the ESP32-S3 firmware only and leaves the audio chip alone.
ESP32-S3 + XMOS voice puck: dual mics, speaker, 3.5mm out, LED ring, rotary dial, hardware mute. Under Muse it is push-to-talk with status on the LED ring and the dial as volume; replies show as text in the Muse app. Flashing Muse replaces the ESPHome firmware; reflash ESPHome to go back to Home Assistant.
What it can do
- Voice · Voice in, text repliesyes
- Imagesno
- Touchscreenno
- Camerano
- Air sensorsno
- Home-network tunnelyes
- Batteryno
- Over-the-air updatesno
Things to say to it
“(Press the button) What's on my calendar tomorrow?”“(Press the button) Turn the volume down.”
What you need
See inside
Take the Home Assistant Voice Preview Edition apart
Drag to turn it, pull the slider to explode it, and tap a part to learn what it does. Open the full 3D view
Loading 3D model
Developer details · build command and SDK notes
Your coding agent runs this for you. The full sequence (token, flash, pair) is on the build page.
tools/board.sh home-assistant-voice buildLimits
Good to know
- The home-network tunnel lets Muse reach devices on your LAN that expose a local HTTP API. Treat it like giving the agent a foothold on your network.
- Pairing has no manufacturer verification and can't prevent an active man-in-the-middle attack.
- Builds are signed with the included development key and never enable Secure Boot. Enable NVS encryption (CONFIG_HOMEHUB_NVS_ENCRYPTION).
- Custom ESP32 commands are not a documented API yet: the command set (display.draw_url, sensors.read, camera.capture, ...) is hardcoded in main/app.c.
Alternatives
Compare with
Primary links